Currie TIE ROD END (RIGHT - HAND THREAD)

Right hand thread tie rod end for RockJock's Currectlync heavy duty steering system is designed withВ 22mm x 1.5 pitch Right Hand threads for maximum strength. Features a zerk fitting for greasing for increased performance and long life.

Includes boot, castle nut, and cotter pin. If you are buying a replacement tie rod end for your Currectlync steering-this is the tie rod end with the zerk fitting on the back of the cap that goes on the driver's side of the vehicle!

For use as a replacement part for the RockJock Currectlync system only and may Not be used in conjunction with any stock steering components.

Details:

• Currectlync Tie Rod End
• 22mm x 1.5 threads for maximum strength
• 97-06 Wrangler TJ and LJ Unlimited/XJ/MJ
• Right Hand Thread
• Zerk On Side
• For Use w/ CE-9701 Kit
• Each
• PLEASE NOTE: Rod end can be damaged by attempting to force grease into them. You NEVER want to use a power grease gun on these rods. Only use a hand pump (low pressure) grease gun, so that you can feel if the rod ends are taking grease. Attempting to force grease in will pop the back cap on the rod end out, doming the cap, and destroying the rod end. DAMAGE CAUSED TO ROD ENDS BY FORCING GREASE IN OR USING A POWER GREASE GUN IS NOT COVERED UNDER WARRANTY! Use only non-synthetic, high moly lube grease.