Like most Jeep owners that actually wheel, I like getting my Jeep nice and muddy. But mud is actually pretty hard on your Jeep. Specifically your Belt Tensioner, the Idler Pulleys and your Alternator. The pulley on the tensioner as well as the idler pulley can seize up. If this happens, the belt will melt. Because the belt on many models drives the power steering pump, the power brakes, alternator and most importantly the water pump will stop functioning.
I’ve found this out the hard way a couple times.
As a result, I’m not as cool as everyone else when it comes to mud; I take it slow. But if you like hauling ass through mud this video is for you; and found some pulleys hat will make your Jeep just a bit more durable…
…check it out!
Tools You will need for this install:
– 8mm Socket
– 9mm Socket
– 10mm Socket
– 13mm Socket
– 15mm Socket
– 1/2” Breaker Bar
Parts list:
NAPA Idler Pulley: UNR 36816
NAPA Serpentine Belt: UNR 25060876
NAPA Belt Tensioner: UNR 39415
